3D принтер Qidi Tech X-Plus 3 Faster Speed 600mm/s ,Bigger than bigger 280*280*270 mm ,High-Flow 35mm³/s ,Acceleration: 20000mm/s

3D  принтер Qidi Tech X-Plus 3 Faster Speed 600mm/s ,Bigger than bigger 280*280*270 mm ,High-Flow 35mm³/s ,Acceleration: 20000mm/s

-Designed for professional high speed printing application grade materials-


-Faster Speed 600mm/s
-Bigger than bigger 280*280*270 mm
-High-Flow 35mm³/s
-Acceleration: 20000mm/s²

PLUS 3 configures the above technologies for truly fast printing!



Main frequency 1.5GHz, equipped with 8G-EMMC and 1G DDR3

CoreXY Structure

·Reduce the motion Inertia and improve the motion speed
·TMC2209 silent drive
·Less noise

The Upgraded

Weight reduced to 600g from 1600g.
Enhanced strength, 6-12 times stronger than steel.

Extrusion The 9.5:1 gear ratio

High speed printing in real life

Two Sets of Hot End

Copper Alloy Nozzle,
Better thermal conductivity,
Printing Smoother, More Durable,
Hardened Steel nozzle, Better For High-Performance Materials, Longer life
Both 350℃ Max Print Temp

Controlled Temperature Chamber + Drying box

PLUS3 built-in independent heating device, maximum temperature 65℃ and independent control power supply, for professional users according to the material characteristics, easy to make parts! Especially for printing complex ABS, PETG parts have a better effect!

No Layer Separation
The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensure that the part is built uniformly without the generation of internal stresses.

No Warping
Heated Chamber

Resonance Compensation

Professional Printing High Performance Materials

Automatic Levelling

New automatic intelligent levelling 16 points are taken to calculate the printing Compensation

Flexiable HF Board

Excellent adhesion,
No warping trouble,
Easy to remove the prints

Excellent User Experience

The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started!

Quality Service

Since our establishment 9 years ago, we have been focusing on the whole machine FDM R & D and production, we are also very few manufacturers with high-end materials R & D and production capacity! We have been trying to create better experience for users, better product quality, to create value for users is our pursuit. We are far ahead of our peers in terms of user praise on Amazon!

X-PLUS 3D printer, as the best-selling product of Qdi, has been favored by the majority of users. This new generation PLUS 3 has been spent more than a year by our R&D team, and we have done a lot of software and hardware upgrades. We hope to bring better product performance to users again! The PLUS 3 is a high-performance, high-speed, commercial-grade 3D printer.


Machine Name
Build Volume
Net weight
Printing Speed≤600mm/s≤500mm/s
Extruder Flow:35mm³/s30mm³/s
Extruder Temp≤350°C≤300°C
Hotend (Included)Copper alloy nozzle hotend
For Common materials
Brass Nozzle
Hardened steel nozzle hotend
For Abrasive materials
Auxiliary Part Cooling Fan
Chamber Temperature Control65°C Independent Chamber Heating65°C Independent Chamber Heating
Chamber Circulation Fan
With Activated carbon air filter
Screen5.0 inch4.3 inch
800*480 touch screen480*272 touch screen
  • Производитель: TEVO
  • Код товара: 3D принтер Qidi Tech X-Plus 3
  • Доступность: На складе
  • 72 900 р.

Теги: 3D принтер Qidi Tech X-Plus 3 Faster Speed 600mm/s, Bigger than bigger 280*280*270 mm, High-Flow 35mm³/s, Acceleration: 20000mm/s